我刚刚重新安装XAMPP,当我试图在XAMPP控制面板中启动我的Apache服务器时,我现在得到以下错误:

16:50:25  [Apache]     Status change detected: running
16:50:26  [Apache]     Status change detected: stopped
16:50:26  [Apache]     Error: Apache shutdown unexpectedly.
16:50:26  [Apache]     This may be due to a blocked port, missing dependencies,
16:50:26  [Apache]     improper privileges, a crash, or a shutdown by another method.
16:50:26  [Apache]     Press the Logs button to view error logs and check
16:50:26  [Apache]     the Windows Event Viewer for more clues
16:50:26  [Apache]     If you need more help, copy and post this
16:50:26  [Apache]     entire log window on the forums

我怎么解决这个问题?


当前回答

如果上面所有的答案都不奏效,那么就这么做。注释掉php.ini文件中的所有扩展名。

In xampp control panel, click on Apache config. click on php.ini In php ctrl + F (extension) to find all extensions in your php.ini Comment out each and every active extension by adding a ; at the start of each extension line. example ;;;extension=bz2 i put 3 ;;; because i wanted to know ones i commented out so that when i come back to deburg which one had a problem, it was easy for me to see which ones i commented out. Make sure all extensions=whatever are commented out. Run your apache server. To pickup which extension was the problem, one by one un-comment your extensions while restarting your server until you catch the culprit.

其他回答

您可以做的一件事是通过发出命令停止端口80上的服务

net stop http

在cmd中。系统将询问您是否确定要停止这些服务。我发现我有一些服务我没有使用,并关闭了它们。

要查看还有谁正在使用端口80,请键入cmd

netstat -abno

我假设您希望在端口80上运行Apache。如果是这种情况,并且希望保留冲突的服务,则需要将它们关联到一个新的端口。

如果问题不是端口繁忙,您也可以尝试以下方法:在XAMPP配置面板中选择“显示调试信息”。当启动Apache时,会显示类似“正在执行”c:\xampp\ Apache \bin\httpd.exe”的内容。如果你运行它

c:\xampp\apache\bin\httpd.exe

在cmd中,你会得到更多的信息(我曾经有一些问题与我的httpd.conf文件)。

相关:如何释放我的端口80在本地主机Windows?Apache不能在xampp中运行

这对我很管用……

如果你正在使用windows…

在windows搜索栏中搜索'cmd'。

输入:C: \ xampp \ apache \ bin \ httpd.exe

查找发生错误的文件和行。

例如,我的在下面的文件中 第37行。

httpd-multilang-errordoc.conf

打开代码并通过删除该行或修复该行来修复错误。

完成了!我现在该工作了。

:)

遵循以下步骤:

Open your XAMPP control panel then click its "Config" Choose the "Apache (httpd.conf)" and find this code below and change it into this one: #Change this to Listen on specific IP addresses as shown below #to prevent Apache from glomming onto all bound IP addresses. #Listen 0.0.0.0:80 #Listen [::]:80 Listen 80 # Dynamic Shared Object (DSO) Support Save it (Ctrl + S) After that, go back to the XAMPP control panel and click its config again. Choose "Apache (httpd-ssl.conf)", find this code below, and change it again: # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # #Listen 0.0.0.0:443 #Listen [::]:443 Listen 443 Save it (Ctrl + S) Then, click the "config" (note: above the netstat) and click the "service and port settings". Change "Main Port" to 8080 and "SSL Port" to 4433, then save it. Finally, go to the "control panel" -> "Programs & Features" -> "Turn Windows On or Off". Uncheck your "Internet Information Services", and then click OK.

只需等待它,您的计算机/笔记本电脑将自动重新启动,并尝试再次打开XAMPP控制面板,然后启动Apache。

我也有同样的问题(在Windows 8.1上),但我只是通过提取到C:\而不是C:\somefolder来解决它,就像我一开始做的那样。例如,控制面板的路径现在是C:\xampp\xampp-control.exe

Apache服务器默认运行在80、443端口上。您的问题是两个端口中的一个或两个都忙。通常Skype或VMware Workstation使用这两个端口。所以,确保它们没有在运行。确保端口在windows上是空闲的最好方法是:

单击“窗口”按钮。 在搜索栏中输入resmon,打开资源监视器resmon.exe。 Open Listening Ports,这将显示打开的已使用端口。 现在您可以看到哪个进程正在使用端口80和443。 然后,您可以从CMD中使用进程的PID(在资源监视器中显示)终止进程,或者直接从任务管理器中终止进程。 使用PID类型Taskkill /PID 26356 /F从CMD中终止进程,其中26356是PID。