如果函数由于某些原因(例如，它不是你的vim)不可用，下面的方法可能会很方便。

使用:buffers命令来查找打开的缓冲区的id，导航到所需的窗口，并使用像:b 5这样的命令来打开缓冲区(在本例中是缓冲区号5)。重复两次，窗口的内容将被交换。

我“发明”了这种方法，在几次尝试记忆ctrl-w-something序列，甚至是非常简单的布局，如1-2-3在最初的问题。

如果函数由于某些原因(例如，它不是你的vim)不可用，下面的方法可能会很方便。

使用:buffers命令来查找打开的缓冲区的id，导航到所需的窗口，并使用像:b 5这样的命令来打开缓冲区(在本例中是缓冲区号5)。重复两次，窗口的内容将被交换。

我“发明”了这种方法，在几次尝试记忆ctrl-w-something序列，甚至是非常简单的布局，如1-2-3在最初的问题。

以@sgriffin的回答为基础，这里有一些更接近你要求的东西:

function! MarkWindow()
        let g:markedWinNum = winnr()
endfunction

function! SwapBufferWithMarkedWindow()
        " Capture current window and buffer
        let curWinNum = winnr()
        let curBufNum = bufnr("%")

        " Switch to marked window, mark buffer, and open current buffer
        execute g:markedWinNum . "wincmd w"
        let markedBufNum = bufnr("%")
        execute "hide buf" curBufNum

        " Switch back to current window and open marked buffer
        execute curWinNum . "wincmd w"
        execute "hide buf" markedBufNum
endfunction

function! CloseMarkedWindow()
        " Capture current window
        let curWinNum = winnr()

        " Switch to marked window and close it, then switch back to current window
        execute g:markedWinNum . "wincmd w"
        execute "hide close"
        execute "wincmd p"
endfunction

function! MoveWindowLeft()
        call MarkWindow()
        execute "wincmd h"
        if winnr() == g:markedWinNum
                execute "wincmd H"
        else
                let g:markedWinNum += 1
                execute "wincmd s"
                execute g:markedWinNum . "wincmd w"
                execute "wincmd h"
                call SwapBufferWithMarkedWindow()
                call CloseMarkedWindow()
        endif
endfunction

function! MoveWindowDown()
        call MarkWindow()
        execute "wincmd j"
        if winnr() == g:markedWinNum
                execute "wincmd J"
        else
                execute "wincmd v"
                execute g:markedWinNum . "wincmd w"
                execute "wincmd j"
                call SwapBufferWithMarkedWindow()
                call CloseMarkedWindow()
        endif
endfunction

function! MoveWindowUp()
        call MarkWindow()
        execute "wincmd k"
        if winnr() == g:markedWinNum
                execute "wincmd K"
        else
                let g:markedWinNum += 1
                execute "wincmd v"
                execute g:markedWinNum . "wincmd w"
                execute "wincmd k"
                call SwapBufferWithMarkedWindow()
                call CloseMarkedWindow()
        endif
endfunction

function! MoveWindowRight()
        call MarkWindow()
        execute "wincmd l"
        if winnr() == g:markedWinNum
                execute "wincmd L"
        else
                execute "wincmd s"
                execute g:markedWinNum . "wincmd w"
                execute "wincmd l"
                call SwapBufferWithMarkedWindow()
                call CloseMarkedWindow()
        endif
endfunction

nnoremap <silent> <Leader>wm :call MarkWindow()<CR>
nnoremap <silent> <Leader>ws :call SwapBufferWithMarkedWindow()<CR>
nnoremap <silent> <Leader>wh :call MoveWindowLeft()<CR>
nnoremap <silent> <Leader>wj :call MoveWindowDown()<CR>
nnoremap <silent> <Leader>wk :call MoveWindowUp()<CR>
nnoremap <silent> <Leader>wl :call MoveWindowRight()<CR>

如果你的行为不符合你的期望，请告诉我。

有点晚了，但在寻找其他东西时看到了这个。我写了两个函数来标记一个窗口，然后在窗口之间交换缓冲区。这似乎就是你想要的。

只要把这些放在你的.vimrc中，然后映射你认为合适的函数:

function! MarkWindowSwap()
    let g:markedWinNum = winnr()
endfunction

function! DoWindowSwap()
    "Mark destination
    let curNum = winnr()
    let curBuf = bufnr( "%" )
    exe g:markedWinNum . "wincmd w"
    "Switch to source and shuffle dest->source
    let markedBuf = bufnr( "%" )
    "Hide and open so that we aren't prompted and keep history
    exe 'hide buf' curBuf
    "Switch to dest and shuffle source->dest
    exe curNum . "wincmd w"
    "Hide and open so that we aren't prompted and keep history
    exe 'hide buf' markedBuf 
endfunction

nmap <silent> <leader>mw :call MarkWindowSwap()<CR>
nmap <silent> <leader>pw :call DoWindowSwap()<CR>

要使用(假设您的mapleader设置为\)，您将:

移动到窗口以标记交换通道 ctrl-w运动 类型\兆瓦 移动到要交换的窗口 \ pw型

瞧!交换缓冲区没有搞砸你的窗口布局!

你也可以使用像X-monad这样的平铺窗口管理器

从这个开始:

____________________
| one       | two  |
|           |      |
|           |______|
|           | three|
|           |      |
|___________|______|

将“three”设置为活动窗口，然后发出命令ctrl+w j，这将移动当前窗口以填充屏幕底部，留给你:

____________________
| one       | two  |
|           |      |
|___________|______|
| three            |
|                  |
|__________________|

现在将'one'或'two'作为活动窗口，然后发出命令ctrl+w r。这将'旋转'当前行中的窗口，留下你:

____________________
| two       | one  |
|           |      |
|___________|______|
| three            |
|                  |
|__________________|

现在将“two”设置为活动窗口，并发出ctrl+w h命令，这将移动当前窗口以填充屏幕左侧，留下:

____________________
| two       | one  |
|           |      |
|           |______|
|           | three|
|           |      |
|___________|______|

如你所见，这个动作有点乱。它有3个窗口，有点像“瓷砖游戏”谜题。如果你有4个或更多的窗口，我不建议你尝试这个方法——你最好关闭它们，然后在需要的位置重新打开它们。

我做了一个视频演示如何在Vim中使用分割窗口。