如果我在Visual Studio 2010 SP1中创建一个新项目,并选择“WPF应用程序”,并尝试构建生成的应用程序,我会得到错误
名称“InitializeComponent”在当前上下文中不存在。
今天早上,当我试图构建当前项目时,我遇到了类似的错误。昨天,我编译和运行它没有问题。
我创建了一个新项目,每当我编译项目时,都会得到错误。我刚刚把项目发给了同事,他刚刚编译完成,没有任何错误。
怎么了?
如果我在Visual Studio 2010 SP1中创建一个新项目,并选择“WPF应用程序”,并尝试构建生成的应用程序,我会得到错误
名称“InitializeComponent”在当前上下文中不存在。
今天早上,当我试图构建当前项目时,我遇到了类似的错误。昨天,我编译和运行它没有问题。
我创建了一个新项目,每当我编译项目时,都会得到错误。我刚刚把项目发给了同事,他刚刚编译完成,没有任何错误。
怎么了?
当前回答
当我不小心从xaml定义中删除类引用时,这发生在我身上:
我已经替换了
<Window x:Class="myapp.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
第一行是:
<RibbonWindow
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
我知道这不是最初问题的答案(因为这是在另一台机器上构建的项目),但错误消息是一样的,所以也许我会帮助别人解决这种情况。
其他回答
其他选项:
在我使用Xamarin Forms的情况下,在“InitializeComponent”的顶部,在我的App.xaml文件中的当前上下文错误中不存在,我还注意到在输出中,.csproj文件未能构建。奇怪。
除了下面两个ItemGroup条目外,文件本身没有什么特别引人注目的:
<ItemGroup>
<EmbeddedResource Remove="App.xaml" />
</ItemGroup>
<ItemGroup>
<ApplicationDefinition Include="App.xaml" />
</ItemGroup>
我从.csproj文件中删除了这两个文件,执行了清理和重建,错误最终消失了。解决这个问题很痛苦,也许这将帮助其他人避免一些压力。
当您从另一个项目导入类,或更改xaml文件的路径,或xaml或.cs文件后面的名称空间时,可能会出现此错误。
第一:它的名称空间可能与新项目中的名称空间不相同
namespace TrainerB.MVC.Forms
{
public partial class AboutDeveloper : ContentPage
{
public AboutDeveloper()
{
InitializeComponent();
}
}
}
正如您所看到的,导入文件中的名称空间以旧的项目名称开始:“TrainerB”,但您的新项目可能有不同的名称,所以只需在.xaml文件和后面的.cs文件中将其更改为正确的新项目名称。
Two:
将.xaml文件的属性更改为:
构建动作:嵌入式资源
自定义工具:MSBuild:UpdateDesignTimeXaml
是的,很多事情都可以…我要加上这一条…… 确保app .xaml指向你的命名空间(app文件所在的位置)+ .App 如。 x: Class = " DX。App" <===确保这是App而不是主页名
希望这也适用于你。
I know this was answered due to a different cause, but this is a highly hit posting and I had ran into the same issue with a class library. In this case, it turned out to be both a change in my namespace (answered in this post here) and that the compiler could not rebuild the Window.g.i.cs which defines the InitializeComponent() method. It couldn't because the class library was missing the ProjectTypeGuid value for WPF projects in the csproj file. Instructions for this are here and here. I thought I would share in case someone else has run into the same issue. Just changing the namespace isn't enough in this case.
如果命名空间是正确的,那么也有一个相同的错误,
只需关闭应用程序并重新打开。
这也许能解决你的问题