你应该先在sdk管理器上安装英特尔硬件加速，然后才能开始在AVD管理器上创建你的虚拟设备

打开Android SDK管理器，安装intelhaxm-86 emulator

在Mac上，Android SDK安装在:/Users/username/Library/Android/ SDK /，因此，你需要运行脚本sudo，如下所示:

sudo sh /Users/username/Library/Android/sdk/extras/intel/Hardware_Accelerated_Execution_Manager/silent_install.sh

如果一切顺利，脚本将输出消息:“通过静默安装!”

然后，重新启动Android Studio并使用所需的AVD运行应用程序。

Right click on your my computer icon and the CPU will be listed on the properties page. Or open device manager and look at the CPU. It must be an Intel processor that supports VT and NX bit (XD) - you can check your CPU # at http://ark.intel.com Also make sure hyperV off bcdedit /set hypervisorlaunchtype off XD bit is on bcdedit /set nx AlwaysOn Use the installer from https://software.intel.com/en-us/android/articles/intel-hardware-accelerated-execution-manager If you're using Avast, disable "Enable hardware-assisted virtualization" under: Settings > Troubleshooting. Restart the PC and try to run the HAXM installation again

如果您最近在Windows操作系统上安装了Docker，则需要关闭Hyper-V特性。请参见安装HAXM时“不支持VT”的顶部答案

你应该先在sdk管理器上安装英特尔硬件加速，然后才能开始在AVD管理器上创建你的虚拟设备