成功克隆我的回购从heroku和添加另一个远程

1/ git clone git@heroku.com:[APP].git
2/ git remote add bitbucket ssh://git@bitbucket.org/[ACCOUNT]/[REPO].git
3/ git push bitbucket master

在运行line(3)或使用SourceTree后，我仍然得到这个错误

conq: repository access denied. access via a deployment key is read-only.

首先，我不明白这条信息在实践中意味着什么。这就是耻辱。

我确实创建了ssh密钥对并添加到heroku:

ssh-keygen -t rsa 
heroku keys:add ./id_rsa.pub 

我还在BitBucket的部署密钥部分添加了我的密钥。但我一定遗漏了什么。这个问题不是出于懒惰，我一直在阅读各种文档，包括BitBuckets指南。但它仍然没有解决这个问题。

这篇文章是有关我可以导入我的heroku git回购到bitbucket ?以及如何?

额外的事实:

ssh -T hg@bitbucket.org
conq: authenticated via a deploy key.

You can use git or hg to connect to Bitbucket. Shell access is disabled.


$ ssh -v git@bitbucket.org
OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011
debug1: Reading configuration data /Users/joel/.ssh/config
debug1: Applying options for bitbucket.org
debug1: Reading configuration data /etc/ssh_config
debug1: Applying options for *
debug1: Connecting to bitbucket.org [207.223.240.181] port 22.
debug1: Connection established.
debug1: identity file /Users/joel/.ssh/id_rsa type 1
debug1: identity file /Users/joel/.ssh/id_rsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.6
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'bitbucket.org' is known and matches the RSA host key.
debug1: Found key in /Users/joel/.ssh/known_hosts:5
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/joel/.ssh/id_rsa
debug1: Remote: Forced command: conq deploykey:13907
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: Agent forwarding disabled.
debug1: Remote: Pty allocation disabled.
debug1: Server accepts key: pkalg ssh-rsa blen 279
debug1: read PEM private key done: type RSA
debug1: Remote: Forced command: conq deploykey:13907
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: Agent forwarding disabled.
debug1: Remote: Pty allocation disabled.
debug1: Authentication succeeded (publickey).
Authenticated to bitbucket.org ([207.223.240.181]:22).
debug1: channel 0: new [client-session]
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
debug1: Sending environment.
debug1: Sending env LC_CTYPE = UTF-8
PTY allocation request failed on channel 0

看起来一切都很好。

将包含所有分支和完整历史的Git存储库从Bitbucket移动到GitHub的最佳方法是什么?

是否有我必须使用的脚本或命令列表?

我试图看到我的降价嵌套列表项呈现与相应的缩进时，在浏览器中查看实时从Bitbucket页面。但即使使用他们的例子(更新)，我也搞不清楚它是如何工作的:

* Item 1
* Item 2
* Item 3
  * Item 3a
  * Item 3b
  * Item 3c

它忽略了3a-c项的缩进:

我想让它看起来像这样(语法在SE和Github上工作得很好):

他们的列表例子尤其令人难以接受:

1. Step 1
2. Step 2
3. Step 3
   * Item 3a
   * Item 3b
   * Item 3c

这是我专门为这个设置的回购。

我有一个网站作为一个远程Git回购从Bitbucket.com使用SSH别名拉。我可以在我的服务器上手动启动SSH -agent，但每次通过SSH登录时都必须这样做。

我手动启动ssh-agent:

eval ssh-agent $SHELL

然后添加代理:

ssh-add ~/.ssh/bitbucket_id

然后当我这样做的时候，它就出现了:

ssh-add -l

我可以出发了。有什么方法可以自动化这个过程，这样我就不必每次登录都这么做了?服务器的操作系统为RedHat 6.2 (Santiago)。

我在bitbucket.org上有一个账户，我注册了我的谷歌账户。现在每次我登录，我只是点击“登录谷歌”，这很好。

如何从git命令行访问我的回购?它要求我输入用户名和密码。我有用户名，但没有密码。 那我怎么登录呢?

我得到这个错误拉:

您的配置指定与ref合并 'refs/heads/feature/Sprint4/ABC-123-Branch'，但没有 这样的裁判是拿来的。

这个错误不会出现在任何其他分支上。这个分支的特殊之处在于，它是从另一个分支的上一次提交中创建的。 我的配置文件如下:

[core]
    repositoryformatversion = 0
    filemode = false
    bare = false
    logallrefupdates = true
    symlinks = false
    ignorecase = true
    hideDotFiles = dotGitOnly
[remote "origin"]
    url = <url here>
    fetch = +refs/heads/*:refs/remotes/origin/*
[branch "master"]
    remote = origin
    merge = refs/heads/master
[branch "new-develop"]
    remote = origin
    merge = refs/heads/new-develop
[branch "feature/Sprint4/ABC-123-Branch"]
    remote = origin
    merge = refs/heads/feature/Sprint4/ABC-123-Branch