Docker开始抛出以下错误:
standard_init_linux。Go:178: exec用户进程导致“exec格式错误”
每当我用CMD或ENTRYPOINT运行特定的docker容器时，不考虑对文件的任何更改，然后删除CMD或ENTRYPOINT。这是我一直在工作的docker文件，直到大约一个小时前都工作得很完美:
FROM buildpack-deps:jessie
ENV PATH /usr/local/bin:$PATH
ENV LANG C.UTF-8
RUN apt-get update && apt-get install -y --no-install-recommends \
tcl \
tk \
&& rm -rf /var/lib/apt/lists/*
ENV GPG_KEY 0D96DF4D4110E5C43FBFB17F2D347EA6AA65421D
ENV PYTHON_VERSION 3.6.0
ENV PYTHON_PIP_VERSION 9.0.1
RUN set -ex \
&& buildDeps=' \
tcl-dev \
tk-dev \
' \
&& apt-get update && apt-get install -y $buildDeps --no-install-recommends && rm -rf /var/lib/apt/lists/* \
\
&& wget -O python.tar.xz "https://www.python.org/ftp/python/${PYTHON_VERSION%%[a-z]*}/Python-$PYTHON_VERSION.tar.xz" \
&& wget -O python.tar.xz.asc "https://www.python.org/ftp/python/${PYTHON_VERSION%%[a-z]*}/Python-$PYTHON_VERSION.tar.xz.asc" \
&& export GNUPGHOME="$(mktemp -d)" \
&& gpg --keyserver ha.pool.sks-keyservers.net --recv-keys "$GPG_KEY" \
&& gpg --batch --verify python.tar.xz.asc python.tar.xz \
&& rm -r "$GNUPGHOME" python.tar.xz.asc \
&& mkdir -p /usr/src/python \
&& tar -xJC /usr/src/python --strip-components=1 -f python.tar.xz \
&& rm python.tar.xz \
\
&& cd /usr/src/python \
&& ./configure \
--enable-loadable-sqlite-extensions \
--enable-shared \
&& make -j$(nproc) \
&& make install \
&& ldconfig \
\
&& if [ ! -e /usr/local/bin/pip3 ]; then : \
&& wget -O /tmp/get-pip.py 'https://bootstrap.pypa.io/get-pip.py' \
&& python3 /tmp/get-pip.py "pip==$PYTHON_PIP_VERSION" \
&& rm /tmp/get-pip.py \
; fi \
&& pip3 install --no-cache-dir --upgrade --force-reinstall "pip==$PYTHON_PIP_VERSION" \
&& [ "$(pip list |tac|tac| awk -F '[ ()]+' '$1 == "pip" { print $2; exit }')" = "$PYTHON_PIP_VERSION" ] \
\
&& find /usr/local -depth \
\( \
\( -type d -a -name test -o -name tests \) \
-o \
\( -type f -a -name '*.pyc' -o -name '*.pyo' \) \
\) -exec rm -rf '{}' + \
&& apt-get purge -y --auto-remove $buildDeps \
&& rm -rf /usr/src/python ~/.cache
RUN cd /usr/local/bin \
&& { [ -e easy_install ] || ln -s easy_install-* easy_install; } \
&& ln -s idle3 idle \
&& ln -s pydoc3 pydoc \
&& ln -s python3 python \
&& ln -s python3-config python-config
RUN pip install uwsgi
RUN mkdir /config
RUN mkdir /logs
ENV HOME /var/www
WORKDIR /config
ADD conf/requirements.txt /config
RUN pip install -r /config/requirements.txt
ADD conf/wsgi.py /config
ADD conf/wsgi.ini /config
ADD conf/__init__.py /config
ADD start.sh /bin/start.sh
RUN chmod +x /bin/start.sh
EXPOSE 8000
ENTRYPOINT ["start.sh", "uwsgi", "--ini", "wsgi.ini"]