I'm going to throw my two cents in. IF you have access to IIS server side, then you can force HTTPS by use of the protocol bindings. For example, you have a website called Blah. In IIS you'd setup two sites: Blah, and Blah (Redirect). For Blah only configure the HTTPS binding (and FTP if you need to, make sure to force it over a secure connection as well). For Blah (Redirect) only configure the HTTP binding. Lastly, in the HTTP Redirect section for Blah (Redirect) make sure to set a 301 redirect to https://blah.com, with exact destination enabled. Make sure that each site in IIS is pointing to it's own root folder otherwise the Web.config will get all screwed up. Also make sure to have HSTS configured on your HTTPSed site so that subsequent requests by the browser are always forced to HTTPS and no redirects occur.

I'm going to throw my two cents in. IF you have access to IIS server side, then you can force HTTPS by use of the protocol bindings. For example, you have a website called Blah. In IIS you'd setup two sites: Blah, and Blah (Redirect). For Blah only configure the HTTPS binding (and FTP if you need to, make sure to force it over a secure connection as well). For Blah (Redirect) only configure the HTTP binding. Lastly, in the HTTP Redirect section for Blah (Redirect) make sure to set a 301 redirect to https://blah.com, with exact destination enabled. Make sure that each site in IIS is pointing to it's own root folder otherwise the Web.config will get all screwed up. Also make sure to have HSTS configured on your HTTPSed site so that subsequent requests by the browser are always forced to HTTPS and no redirects occur.

对于那些使用ASP。净MVC。您可以使用以下两种方式在整个站点上强制使用HTTPS之上的SSL/TLS:

艰难的方式

1 -添加requirehttpattribute到全局过滤器:

GlobalFilters.Filters.Add(new RequireHttpsAttribute());

2 -强制防伪造令牌使用SSL/TLS:

AntiForgeryConfig.RequireSsl = true;

3 -通过更改Web，要求cookie默认要求HTTPS。配置文件:

<system.web>
    <httpCookies httpOnlyCookies="true" requireSSL="true" />
</system.web>

4 -使用NWebSec。拥有NuGet包并添加以下代码行以启用整个站点的严格传输安全。不要忘记在下面添加Preload指令，并将您的网站提交到HSTS Preload站点。更多信息在这里和这里。请注意，如果您不使用OWIN，也可以使用Web。config方法，你可以在NWebSec网站上阅读。

// app is your OWIN IAppBuilder app in Startup.cs
app.UseHsts(options => options.MaxAge(days: 30).Preload());

5 -使用NWebSec。拥有NuGet包并添加以下代码行，以启用跨站点的公钥固定(HPKP)。更多信息在这里和这里。

// app is your OWIN IAppBuilder app in Startup.cs
app.UseHpkp(options => options
    .Sha256Pins(
        "Base64 encoded SHA-256 hash of your first certificate e.g. cUPcTAZWKaASuYWhhneDttWpY3oBAkE3h2+soZS7sWs=",
        "Base64 encoded SHA-256 hash of your second backup certificate e.g. M8HztCzM3elUxkcjR2S5P4hhyBNf6lHkmjAHKhpGPWE=")
    .MaxAge(days: 30));

6 -包括https方案在任何URL的使用。当您在某些浏览器中限制该方案时，内容安全策略(CSP) HTTP报头和子资源完整性(SRI)不能很好地发挥作用。对于HTTPS最好是明确的。如。

<script src="https://ajax.aspnetcdn.com/ajax/bootstrap/3.3.4/bootstrap.min.js"></script>

简单的方法

使用ASP。NET MVC样板Visual Studio项目模板生成一个项目，所有这些和更多的内置。你也可以在GitHub上查看代码。

请使用HSTS (HTTP严格传输安全)

从http://www.hanselman.com/blog/HowToEnableHTTPStrictTransportSecurityHSTSInIIS7.aspx

<?xml version="1.0" encoding="UTF-8"?>
<configuration>
    <system.webServer>
        <rewrite>
            <rules>
                <rule name="HTTP to HTTPS redirect" stopProcessing="true">
                    <match url="(.*)" />
                    <conditions>
                        <add input="{HTTPS}" pattern="off" ignoreCase="true" />
                    </conditions>
                    <action type="Redirect" url="https://{HTTP_HOST}/{R:1}"
                        redirectType="Permanent" />
                </rule>
            </rules>
            <outboundRules>
                <rule name="Add Strict-Transport-Security when HTTPS" enabled="true">
                    <match serverVariable="RESPONSE_Strict_Transport_Security"
                        pattern=".*" />
                    <conditions>
                        <add input="{HTTPS}" pattern="on" ignoreCase="true" />
                    </conditions>
                    <action type="Rewrite" value="max-age=31536000" />
                </rule>
            </outboundRules>
        </rewrite>
    </system.webServer>
</configuration>

原答案(2015年12月4日取代)

基本上

protected void Application_BeginRequest(Object sender, EventArgs e)
{
   if (HttpContext.Current.Request.IsSecureConnection.Equals(false) && HttpContext.Current.Request.IsLocal.Equals(false))
   {
    Response.Redirect("https://" + Request.ServerVariables["HTTP_HOST"]
+   HttpContext.Current.Request.RawUrl);
   }
}

它会被放到global。asax。cs(或global。asax。vb)

我不知道如何在web.config中指定它

如果SSL支持在您的站点中不可配置(例如。应该能够打开/关闭https) -你可以在任何你希望保护的控制器/控制器动作上使用[RequireHttps]属性。

这是基于@特洛伊·亨特的更全面的回答。将这个函数添加到Global.asax.cs中的WebApplication类中:

    protected void Application_BeginRequest(Object sender, EventArgs e)
    {
        // Allow https pages in debugging
        if (Request.IsLocal)
        {
            if (Request.Url.Scheme == "http")
            {
                int localSslPort = 44362; // Your local IIS port for HTTPS

                var path = "https://" + Request.Url.Host + ":" + localSslPort + Request.Url.PathAndQuery;

                Response.Status = "301 Moved Permanently";
                Response.AddHeader("Location", path);
            }
        }
        else
        {
            switch (Request.Url.Scheme)
            {
                case "https":
                    Response.AddHeader("Strict-Transport-Security", "max-age=31536000");
                    break;
                case "http":
                    var path = "https://" + Request.Url.Host + Request.Url.PathAndQuery;
                    Response.Status = "301 Moved Permanently";
                    Response.AddHeader("Location", path);
                    break;
            }
        }
    }

(要在本地构建中启用SSL，请在项目的Properties dock中启用它)